Vacuum Belt Filter Troubleshooting Tips

Rubber Drainage Belt curbing is stretched out and cracking –  This allows slurry to slide off the sides of the belt. Our corrugated curb expands around pulleys, preventing wear damage. We can hot vulcanize onsite to maximize its reliability.

Cloth Belt is blinding in strips –   If your shower bars are clogged then your cloth belt can blind prematurely where it is not being washed. The Micronics Engineered Filtration Group offers self-cleaning shower bars, which will extend the life of your cloth belt and reduce downtime.

You Are Experiencing Vacuum Loss –   This is often caused by misaligned slide strips. If the vacuum pan was recently opened for cleaning, the slide strips may not be properly aligned with the drainage holes on the rubber belt. Reassemble with a proper seal.

Drive Pulley Tracks Poorly –  Grooves on the drive pulley may have worn away. These grooves are necessary to pull the rubber drainage belt. Without them, your rubber belt and main drive will wear prematurely. Fortunately, the Micronics Engineered Filtration Group can replace your drive pulley or recover your worn pulley for a fraction of the cost.

The Cake is Forming Non-uniformly. It Is Thicker On One Side of the unit –  If you are in a new facility, the foundations could have settled within the first few years, causing a bit of a slope. Even a slight change in slope can make a dramatic difference in cake thickness across the width of the belt. Proper alignment will also help your vacuum pan stay sealed.

You Are Experiencing Wrinkles or Bunching in the Cloth Belt  –   If your current belt tracking system is the spring/ rope configuration or a steel two-wheel edge tracker, then the Micronics Engineered Filtration Group’s UHMW polyethylene Edge Trackers are an easy way to smooth out your belt. We can even reconfigure your cloth belt so that it has pip edging for the tracker to grip.

Endless Rubber Drainage Belts Require Weeks of Downtime to Install  –   Instead of tearing your filter apart and struggling to install an endless belt, let the Micronics Engineered Filtration Group come in and hot vulcanize a new rubber drainage belt right onto your equipment in three days. You’ll be up and running in no time!

Vacuum Belt Wear Parts

The Micronics Engineered Filtration Group can supply replacement parts for any manufacturer and model. Here is a list of parts to keep on the stock shelf:

Vacuum Belt Filter Service Available for Every OEM

The Micronics Engineered Filtration Group has a facility in Salt Lake City dedicated to fabricating rubber drainage belts. We have another facility in Winthrop, Maine dedicated to fabricating and refurbishing pulleys and rollers. It is down the street from our facility that fabricates complete Horizontal Vacuum Belt Filters, and other Vacuum Filters. There is a salesperson who covers your area, ready to come down and help fix your vacuum filter!