Filter Plates for Filter Presses
Standard and custom designs to suit your liquid-solid separation needs.
Micronics prides itself on providing Filter Plates and related liquid-solid separation accessories for many industries, including mining, industrial, chemical and wastewater treatment.
We’ve listed some of our standard and custom-designed Filter Plates below. If you don’t see what you need, give us a call at 603-433-1299 or send us email.
Recess Filter Plates
There are 3 basic types of Recess Plates; Open Filtrate,
Closed Filtrate, and Gasketted. They are available
for sidebar or overhead press designs. Mounting
hangers or side handles can accommodate any brand
of filter.
Recess Filter Plates
Membrane Filter Plates
Membrane Filter Press Plates are used to reduce
the cake moisture content or shorten the filtration
cycle time. They may be retrofit to existing filters.
There are two types; fixed and replaceable.
Membrane Filter Plates
Vacuum Membrane Filter Plates
Vacuum Filter Plates are similar to membrane filter
plates but designed to operate at elevated temperatures.
After filtration the chamber below the drainage
surface is inflated with hot water. A vacuum is
then applied within the filtration chamber and draws
out moisture to produce a "bone dry" filter
cake.
Vacuum Membrane Filter Plates
Plate & Frame
Plate & Frame filter plates are the oldest
design and the predecessor to recessed plates. The
chamber is formed by a flat plate on each side of
a frame. Cake is collected in the frame. This type
of plate is usually used for polishing applications
when filtration area is more important than volume
Plate & Frame
200 West Road
Portsmouth, NH 03801
(603) 433-1299
Micronics Filtration Ltd.
Sandbach Road Burslem, Stoke-on-Trent ST6 2DR
(01782) 284 385